Detail Sieve Shaker AS 400 Control
The RETSCH AS 400 control is used for the sieving of dry goods with test sieves of a diameter up to 400 mm. In this, the uniform, horizontal circular motion ensures exact separation of the product to be sieved. Fine and coarse-grained goods as found in the areas of milling, brewing, chemical industry, quarrying, soils, woodworking and plastics industry, can be exactly separated with the AS 400 control. The horizontal circular motion of the product to be sieved is particularly suitable for the separation of certain products, as milled grain, splints, and similar materials. For the testing of plastics ( grainy moulding materials) , the DIN 53477 even requires the circular sieving motion.
The AS 400 control can be used as test instrument for the quality control according to DIN EN ISO 9000. Due to the controlled drive, which is independent of the power frequency, the AS 400 control yields reproducible results worldwide. The desired number of revolutions / sieve acceleration and sieving time are set, displayed and monitored digitally. A test certificate is supplied with the instrument. The instrument can be recalibrated. If desired, the rotation direction can be set to alternate in the interval. Up to 9 sieving programmes can be directly stored in the instrument and later recalled.
An integrated counter mass ensures stability even with a high mass of the sieve stack. The instrument can also be secured to the laboratory bench if desired. The base plate can take very high loads due to 4 eccentric guides. The AS 400 control has an integrated interface for controlling all sieving parameters via the EasySieve software. The required interface cable is included in delivery.
The AS 400 control is a robust device, which meets highest requirements due to its superior technology. The possibility to clamp a wide range of test sieves with various diameters on the device ensures a versatile use of the AS 400 control.
For clamping the sieves, the proven and extremely convenient quick clamping device “ comfort” is available. The sieve stack can be clamped with two simple steps.
Advantages
Sieving with circular sieving motion according to DIN 53477
For sieves up to 400 mm Ø
9 parameter combinations can be stored
Suitable for monitoring inspection, measuring and test equipment in accordance with ISO 9000, can be re-calibrated
Self-monitoring and control of number of revolutions
Easy operation, ergonomic design
Interface for monitoring and evaluation of the sieving operation using the EasySieve software and a standard PC
Low noise and maintenance-free
2 years warranty, conforms with CE standards
Functions
The base plate performs horizontal circular motions with a radius of 15 mm ( according to DIN 53477) . The speed of 50 to 300 rpm is electronically controlled. It is continuously adjustable to meet the requirements of the product to be sieved. The actual value of the number of revolutions is digitally displayed. The base plate is driven by a robust, maintenance-free drive motor with a power of 125 Watt. The power is transmitted via an eccentric.
Tampilkan Lebih Banyak