Detail PH/ ORP/ Temperature Meter With Built-in Printer HI 122
HI 122 is a benchtop instrument featuring a built-in printer, Calibration Check™ , electrode response time and condition monitoring, and enhanced diagnostic messages during calibration.
This meter uses HANNA’ s “ P” series of electrodes. For more accuracy, these meters also check if the measurement is outside the calibration range and warns the user in case measurements are too far outside the calibration points. Calibration can be performed in up to five points using the standard seven buffers that are automatically recognized, or by using two custom buffer values. The buffer( s) used during calibration are displayed on the LCD even when in measurement mode.
Specification:
Range pH -2.00 to 16.00 pH; -2.000 to 16.000 pH
ORP ± 999.9 mV; ± 2000 mV
Temperature -20.0 to 120.0º C ( -4.0 to 248.0º F)
Resolution pH 0.01 pH / 0.001 pH
ORP 0.1 mV / 1 mV
Temperature 0.1° C ( 0.1º F)
Accuracy pH ± 0.01 pH / ± 0.002 pH
ORP ± 0.2 mV ( ± 699.9 mV) / ± 0.5 mV ( ± 999.9 mV) / ± 1 mV ( ± 2000 mV)
Temperature ± 0.4° C ( ± 0.7º F) excluding probe error
BNC Inputs 1 for pH electrode
Calibration Check Status of electrode condition and response time
status of the buffer solutions during calibration
Relative mV
Offset Range ± 2000 mV
pH Calibration automatic, up to 5 points with 7 memorized values ( 1.68, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45) + 2 custom buffers
Temperature Compensation Automatic or manual, -20.0 to 120° C ( -4 to 248° F)
pH Electrode HI 1131P, glass body, refillable, BNC + pin connectors, 1 m cable ( included)
Temperature Probe HI 7662-T with 1 m ( 3.3' ) cable ( included)
Input Impedance 1012 Ohm
Log-On-Demand 50 samples
Automatic Logging 1000 samples
PC Connection RS232 serial port, opto-isolated
Printer built-in dot matrix printer, with 44 mm plain paper
Power Supply 12 Vdc adapter ( included)
Environment 0 to 50° C ( 32 to 122° F) ; RH max 95%
Dimensions 280 x 203 x 84 mm ( 11.0 x 8.0 x 3.3 " )
Weight 1.9 kg ( 4.2 lbs.)
Tampilkan Lebih Banyak